Liquidation: Permacel's World Class Pressure Sensitive Tape Operation in Pleasant Prairie, WI.

Margot Machinery, in cooperation with Joseph Finn Company and Aaron Equipment Company, is pleased to offer the Tape Slitters and the component equipment of the remaining Geometric Machine Pressure Sensitive Tape Line at Permacel's Pleasant Prairie (WI) pressure sensitive tape manufacturing operation:

Tape Coating Line Components

Ref# 231316 62" Used Geometric Machine Model 3000 Turret Unwind (2002) - SOLD: equipped with shaftless 40" diameter power chucking arms on 3" and 6" cores, ball screw arm positioning system with air motor, Series 300 dual direction unwind splice stand, hydraulic lift table with V-top cart and self centering mechanism, linear bearing slide base with pneumatic/hydraulic web guide mechanism, AC indexing motor and AC vector drives.

Ref# 231325 62" Used Geometric Machine Accumulator (2002): equipped with 150 feet of web storage with seventeen 4" diameter idler rolls, structural tubing uprights, framework riding on linear ball bearings, top carriage framework for idler support on both top and bottom, ball screws to raise and lower framework, splice station with traversing sewing machine for fabric and non-wovens.

Ref# 231334 62" Used Geometric Machine Series 300
2-Roll Gravure Coating Head (2002): A 2-roll gravure coater with 1.25" side plates and 8" diameter coating rolls. Stainless steel coating pan, fitted with Mayer rod coating capability, cartridge type rollout for the gravure roll. Impression roll is cantilevered and sleeved. MEGtec 36" diameter heated roll over coating head with impingement oven around part of the circumference.

Ref# 231337 62" Used Geometric Machine Series 300
2-Roll Gravure Coating Head (2002): A 2-roll gravure coater with 1.25" side plates and 8" diameter coating rolls. Stainless steel coating pan, cartridge type rollout for the gravure roll. Impression roll is cantilevered and sleeved. MEGtec 36" diameter heated roll over coating head with impingement oven around part of the circumference.

Ref# 231348 62" Used Geometric Machine Series 300
3-Roll Gravure Coating Head (2002) - SOLD: a 3-roll reverse roll coater with 3" side plates and 14" diameter spiral jacketed, temperature controlled coating rolls, tapered sleeve backup roll, nip fed, one spreader roll, and two web support idler rolls. Doctor blade and end dams. High precision gap adjustments for adjusting metering roll to applicator roll and rubber roll to applicator roll. Smoothing bar in a comma configuration, and laser type nip sensors included.

Ref# 231587 62" Used Geometric Machine Series 300
2-Roll Gravure Coating Head (2002) - SOLD: A 2-roll gravure coater with 1.25" side plates and 8" diameter coating rolls. Stainless steel coating pan, cartridge type rollout for the gravure roll. Impression roll is cantilevered and sleeved. MEGtec 36" diameter heated roll over coating head with impingement oven around part of the circumference.

Ref# 231588 62" Used Geometric Machine Series 300
3-Roll Gravure Coating Head (2002) - SOLD: A duplex center surface slitter with a 0.25" minimum slit width and equipped with a 24" maximum diameter shafted unwind, shear, razor and score slitting, 20" maximum diameter cantilevered duplex center surface rewind, minimum gap capable.

Ref# 231589 62" Geometric Machine Turret Rewind - SOLD: Equipped with 40" diameter shaftless phantom axis turret rewind with 3" & 6" chucks, mechanical safety latches for 50" - 62" rolls, dual direction rollchanger for under /over web transfer, dancer tension control system with transducers for tension readout.

Ref# 231596 62" Geometric Machine Turret Unwind - SOLD:
Equipped with shaftless 40" diameter power chucking arms on 3" and 6" cores, ball screw arm positioning system w/ air motor, Series 300 dual direction unwind splice stand, hydraulic lift table w/ V-top cart and self centering mechanism, linear bearing slide base with pneumatic/hydraulic web guide mechanism, AC indexing motor and AC vector drives.

Ref# 232712 66" Face Geometric Machine Turn Bar - SOLD:
Equiped with two (2) 6" diameter air bars, three (3) 6" diameter idler rolls, and regenerative blower.

Ref# 232720 62" Geometric Machine Laminator - SOLD:
A 2-roll laminating station equiped with 10" diameter laminating roll, 18" diameter spiral jacketed chill roll, and AC Flux Vector Drives.

Used Tape Slitters

Ref# 209419 62" Ghezzi & Annoni RT 260 Duplex Turret Center Slitter (2002) :
A semi-automatic pressure sensitive tape slitter equipped with a 40" maximum diameter shaftless roll lift driven unwind, razor and score slitting system, 12" diameter trim rewind, 10" diameter rewinds (minimum gap capable), Lenze AC motors and digital drives, Allen Bradley SLC 500 PLC, Panel View 1000 color operator touch screen. .

Ref# 209421 62" Elite Cameron CS500 Duplex Center Surface Slitter (2001):
A pressure sensitive tape slitter equipped with a 24" diameter single position shafted unwind, shear and score slitting (.025 minimum slit width), 20" diameter rewind, Allen Bradley Panel View 1000 color operator touch screen, Allen Bradley PLC, Eurotherm 3-motor drive.

For more information on this liquidation, please call our office at (518) 346-6379, or email us at sales@margot.com.